Skip to content

Integral 120 GB V Series Plus SATA III 2.5″ SSD 2.5″ Serial ATA III TLC


Brand: Integral
Product name: 120 GB V Series Plus SATA III 2.5″ SSD
Product code: INSSD120GS625V2P
EAN/UPC code: 5055288449336
  • 120 GB 2.5″ Serial ATA III
  • Read speed: 550 MB/s
  • Write speed: 500 MB/s
  • TLC
  • S.M.A.R.T. support TRIM support

In stock

SKU: B47078289 Category: Tag:

The Integral V Series Plus SSD is the best SATA III choice for increasing storage and boosting performance for your desktop or laptop PC. With a fantastic combination of fast data read/write and reliability, along with low power operation, the Integral V Series Plus offers excellent value.

3 year warranty


SSD form factor
The size of the solid-state drive, given in inches
SSD capacity
The Solid State Drive’s data storage capacity.
120 GB
Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA III
Memory type
Type of memory in the device e.g. DDR3, SRAM (Static RAM).
NVM Express (NVMe) or Non-Volatile Memory Host Controller Interface Specification (NVMHCIS) is an open logical device interface specification for accessing non-volatile storage media attached via a PCI Express (PCIe) bus. NVM Express, as a logical device interface, has been designed to capitalize on the low latency and internal parallelism of solid-state storage devices.
Component for
What this product is used as a part of (component for).
Hardware encryption
Data transfer rate
Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
6 Gbit/s
Read speed
The speed at which a device can read data.
550 MB/s
Write speed
The speed at which a device can write data.
500 MB/s
Controller type
S.M.A.R.T. support
TRIM support
Mean time between failures (MTBF)
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
1500000 h
Protection features
Physical effects from which the product is protected e.g. water resistant, crash proof.
Shock resistant
TBW rating
Operating voltage
Defines the range of operating voltages available
5 V
Power consumption (read)
1.65 W
Power consumption (write)
1.8 W
Operational conditions
Operating temperature (T-T)
The minimum and maximum temperatures at which the product can be safely operated.
0 – 70 °C
Storage temperature (T-T)
The minimum and maximum temperatures at which the product can be safely stored.
-40 – 85 °C
Operating relative humidity (H-H)
5 – 85%
Operating vibration
Environmental requirements for vibration in operating mode
3.08 G
Technical details
Sustainability certificates
Weight & dimensions
The measurement or extent of something from side to side.
69.8 mm
The distance from the front to the back of something.
100.2 mm
The measurement of the product from head to foot or from base to top.
7 mm
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
45 g
Packaging data
Package width
The distance from one side of the packaging to the other.
107 mm
Package depth
The distance from the front to the back of the packaging.
13 mm
Package height
The distance from the top to the bottom of the packaging.
133 mm
Package weight
Weight of the packaged product.
64 g